Re: Chauvet Kinta FX
Posted: Fri Apr 28, 2017 4:49 am
I have followed the manual accurately, I believe.
I am not familiar with laser type devices but sometimes programs or macros on one channel can affect other channels. Lighting manuals, in my experience anyway, are notorious for lack of detail!
Also, when working with all the DMX controls as in 9-ch mode, you have the control over each item and may have to build the efx you want from within QLC+.
If you want to test the device independently of the fixture definition, then just give the light an address, say 001, and then go into simple desk and use the sliders (1 to 9 if the address is 001 and you are in 9-CH mode) to check what the light does over each address range.
Cheers
Mark
I am not familiar with laser type devices but sometimes programs or macros on one channel can affect other channels. Lighting manuals, in my experience anyway, are notorious for lack of detail!
Also, when working with all the DMX controls as in 9-ch mode, you have the control over each item and may have to build the efx you want from within QLC+.
If you want to test the device independently of the fixture definition, then just give the light an address, say 001, and then go into simple desk and use the sliders (1 to 9 if the address is 001 and you are in 9-CH mode) to check what the light does over each address range.
Cheers
Mark