Page 1 of 1
anyone using a visualiser with qlc+
Posted: Tue Apr 28, 2015 11:10 pm
by Aidan Vogt
anyone using a visualiser with qlc+
I would be interested in using one
Re: anyone using a visualiser with qlc+
Posted: Wed Apr 29, 2015 8:00 am
by TheBelette
Hi,
I have used Capture (
http://www.capturesweden.com) on MAC, a free student version is available with several projectors.
It use Artnet to communicate with QLC.
You can also use Magic easy view 3D for PC only or MAC with parallel, it's the same think you send the DMX to the visualizer via Artnet.
Re: anyone using a visualiser with qlc+
Posted: Wed Apr 29, 2015 8:38 am
by Aidan Vogt
hey there, thanks.
I have capture but have never been able to get it to work with qlc.
big ask but can you give some pointers to get it happening.
also found that the free capture doesn't have any fixtures, i am sure i am doing something wrong.
Re: anyone using a visualiser with qlc+
Posted: Wed Apr 29, 2015 8:50 am
by TheBelette
First launch Capture then QLC
On QLC check the output artnet you will see the Capture Node.
- Configuration on QLC
And then you go to Capture on the DMX univers you select the ArtNet for the Universe 1.
- Configuration on Capture
You also need to patch your projectors on Capture with the same address as in QLC.
Re: anyone using a visualiser with qlc+
Posted: Thu Apr 30, 2015 5:07 am
by Aidan Vogt
great thanks.
I found the library add on to.
will let you know how i go
Re: anyone using a visualiser with qlc+
Posted: Sat May 02, 2015 6:33 am
by Aidan Vogt
Thanks that was really helpful.
I downloaded Argo student but it opens as demo, and I can't save my project
Ever seen this?
Re: anyone using a visualiser with qlc+
Posted: Thu Apr 07, 2022 2:03 am
by Emekaao
TheBelette wrote: ↑Wed Apr 29, 2015 8:50 am
First launch Capture then QLC
On QLC check the output artnet you will see the Capture Node.
2015-04-29 10.52.00.jpg
And then you go to Capture on the DMX univers you select the ArtNet for the Universe 1.
2015-04-29 10.52.29.jpg
You also need to patch your projectors on Capture with the same address as in QLC.
Thanks for the heads up. It was really helpful.
How do I patch projectors on Capture with the same address as in QLC?
Re: anyone using a visualiser with qlc+
Posted: Thu Apr 07, 2022 8:26 am
by mcallegari
Emekaao wrote: ↑Thu Apr 07, 2022 2:03 am
Thanks for the heads up. It was really helpful.
How do I patch projectors on Capture with the same address as in QLC?
I think this is a question for Capture users rather than QLC+ users
BTW there's plenty of tutorials about it:
https://www.youtube.com/watch?v=WRb7sRn ... lisationAB
Re: anyone using a visualiser with qlc+
Posted: Fri Apr 08, 2022 12:06 am
by Emekaao
Thanks for your response.
I am able to find my way around now.