inconsistency of delta values

Report an issue that you found while using QLC+ 5.x.
Please provide as many details as you can, a sample workspace if available and don't forget to read the forum posting guidelines first !
Post Reply
giacomo
Posts: 530
Joined: Tue May 26, 2015 6:17 pm
Real Name:

During the week I've used v5 and I've noticed an inconsistency when adjusting the intensity (position seems more wrong but I couldn't test it) of multiple selection.
Here the starting point, selected 2 and 4 fixtures.
2a.png
4a.png
Top
giacomo
Posts: 530
Joined: Tue May 26, 2015 6:17 pm
Real Name:

Rising the intensity to reach 255 shows 2 different value used.
2b.png
4b.png
Top
giacomo
Posts: 530
Joined: Tue May 26, 2015 6:17 pm
Real Name:

Lowering the intensity to the original states uses again different values.
2c.png
4c.png
Top
giacomo
Posts: 530
Joined: Tue May 26, 2015 6:17 pm
Real Name:

After adjusting the intensity widget another time, I cannot reach the full value anymore .
2d.png
I don't know if there is a math behind it or it's a bug, I believe that the operations should be linear for easiness.
You add a dmx value of 50 > the result it's not good > you subtract the same dmx value and you're back to the original state (of course when you don't exceed the limits)
A good week.
Top
Post Reply

Return to “QLC+ 5 Issue reports”