SHOWTEC TECHNO DERBY

[Papach]

Hello, I'm new to the forum.
I'm looking to integrate a SHOWTEC TECHNO DERBY into Qlc+.
I've been looking for a fixture file but without success.
Does anyone have this file please?

[Cheng]

the guideline is asking for the dmx Channels here they come

the website: https://www.highlite.com/de/43156-techno-derby.html
english version of the manual: https://www.highlite.com/de/mwdownloads ... d/17430587

well, this is my first fixture, so s.o. experienced may check?

there are two modes?
- mode 1 has a control channel?
- mode 2 has 4 channels for deeper control?

I am not sure about the beam angle ... I guesed from the picture
chanel 3 value 0 is not functinal. I used range 0-0
12 Watt x 683 = 8196 Lumen?

the fixture validator is happy

I found a few mistakes, not sure if i found all

[Cheng]

The modes should be called
1 channel
4 channel
like in the manual and not 1 and 2.

[Cheng]

change: 4x3=12 Watt => 1200 Lumen max.

[Papach]

I'm French, so I'm having a bit of trouble keeping up. Thank you all for your help. You guys are great.

[Cheng]

Il s'agit plutôt de 85 lumens, pas de 1200, mais cela ne devrait pas faire de différence au quotidien.
Mon traducteur préféré est celui-ci :
https://www.deepl.com

meilleures salutations

[Cheng]

Now with 85 lumen (120 W x 7) and two heads (strobes and rgbw) at 4 channels

best regards