I have recently started to use qlc+ and when I try to use my laptop my lights randomly flicker. I have had no issues of the sort when using the ETC colour scource 40av but when I use qlc+ they constantly flicker.
I am wondering if my super cheap usb to x converter may be to blame?
Any advice or tips would be greatly appreciated.
Picture is my usb adapter
Flickers likely based on usb-dmx
-
mcallegari
- Posts: 4482
- Joined: Sun Apr 12, 2015 9:09 am
- Location: Italy
- Real Name: Massimo Callegari
- Contact:
I have added #8 here
https://docs.qlcplus.org/v4/basics/ques ... nd-answers
https://docs.qlcplus.org/v4/basics/ques ... nd-answers
-
GGGss
- Posts: 2732
- Joined: Mon Sep 12, 2016 7:15 pm
- Location: Belgium
- Real Name: Fredje Gallon
Massimo,mcallegari wrote: ↑Sun Sep 17, 2023 2:26 pm I have added #8 here
https://docs.qlcplus.org/v4/basics/ques ... nd-answers
May I add that GrandMa f.i. has a fixed 30Hz refresh rate? So they choose to be on the safe side of the norm.
All electric machines work on smoke... when the smoke escapes... they don't work anymore
-
mcallegari
- Posts: 4482
- Joined: Sun Apr 12, 2015 9:09 am
- Location: Italy
- Real Name: Massimo Callegari
- Contact:
Yep, I'm aware of that...that's why Open DMX is already @30Hz in the codeGGGss wrote: ↑Mon Sep 18, 2023 7:24 amMassimo,mcallegari wrote: ↑Sun Sep 17, 2023 2:26 pm I have added #8 here
https://docs.qlcplus.org/v4/basics/ques ... nd-answers
May I add that GrandMa f.i. has a fixed 30Hz refresh rate? So they choose to be on the safe side of the norm.
https://github.com/mcallegari/qlcplus/b ... en.cpp#L31
PRO adapters though could work at 44Hz steady.
https://github.com/mcallegari/qlcplus/b ... dget.h#L37