Hi,
First - many thanks for all QLC+ SW developer!
My setup:
MacBook 12.6.3 Monterey
QLC+ 4.2.16
Behringer X-Touch Universal (LCD scribbe strips)
I would like to set the LCD scribble strips on X-Touch Universal via MIDI initialization message. I have created the MIDI Template File (XT.qxm in attachment) with SysEx data, the file is located in right folder on the mac - Midi Templates. (in attachments)
I see another MIDI templates from QLC+, but my file is not setable.
Am I doing something wrong? Can I send SysEx Data to X-Touch directly from QLC+ like this?
Note: I can set the LCD scribble strips via SysEx Librarian, it works fine. But the SysEx Librarian SW cannot be started from QLC+...
Many thanks!
Behringer X-Touch Universal - LCD scribble strip vs. MIDI initialization message
-
MichelSliepenbeek
- Posts: 504
- Joined: Wed Feb 08, 2023 10:24 am
- Location: Nederland
- Real Name: Michel Sliepenbeek
This might be interesting for you https://discourse.ardour.org/t/x-touch- ... ips/100627.
Especially Page 7 of this link http://www.budgetfeatures.com/XctlDOC/X ... 20V1.0.pdf
By the way, in the QXM file there is a NAME Tag, you might change it to <Name>Behringer X-Touch Universal </Name>
Especially Page 7 of this link http://www.budgetfeatures.com/XctlDOC/X ... 20V1.0.pdf
By the way, in the QXM file there is a NAME Tag, you might change it to <Name>Behringer X-Touch Universal </Name>
A QLC Workspace is like a Bob Ross painting: "it's your world, you can create whatever you want!"
-
Yestalgia
- Posts: 371
- Joined: Thu Jun 17, 2021 9:31 am
- Location: Australia
- Real Name:
- Contact:
I've managed to make this work with a Faderport 16. It's definitely possible.