Hello
I have tried to use my Eurolite USB-DMX512 as a DMX output but my two led bars do not turn on, even one led.
The interface shows up as "FT232R USB UART " the mode is set to Pro RX/TX and the frequency to 44HZ. The official drivers are installed.
It works with DMXcontrol 3
I have previousely tried to use QLC 5.0.0 where the interface was functioning for a short while but with some heavy flickering on the LED bars.
Then all of a sudden it did not work anymore on 5.0.0 and neither on 4.12.6
I have now tried to play with almost all settings for three hours but i cant't get it to work.
What am I missing or doing wrong?
PC: Windows 10
Interface: Eurolite USB-DMX512 (the non PRO version)
Software: 5.0.0 and 4.12.6
Eurolite USB-DMX512 no output
-
- Posts: 3
- Joined: Sun Sep 18, 2022 8:38 am
- Real Name:
I solved it myself the Modus must be set to Open TX then it is fully working
sorry to bother you
sorry to bother you