sACN and Artnet

Ask a question about the usage of QLC+ with the Windows operating system
Forum rules
Post Reply
Jtools13
Posts: 1
Joined: Tue Sep 13, 2022 10:54 am
Real Name: Jason block

Can QLC+ output sACN?

If not and I have to use Artnet, how do you set up the port? Checked everything I could in Inputs/Outputs section, but no port configuration…trying to communicate with a CueSevrver2. CueServer2 can accept Artnet, but needs to know port config/address.

Anyone have any advise?

Thanks
Top
janosvitok
Posts: 1274
Joined: Mon Apr 13, 2015 7:05 am
Location: Bratislava, Slovakia
Real Name: Jano Svitok
Contact:
Contact janosvitok

sACN is supported.

artnet configuration: https://www.qlcplus.org/docs/html_en_EN ... lugin.html
Top
JasonB
Posts: 4
Joined: Fri Aug 26, 2022 11:06 pm
Real Name: Jason Block

Where do you go to select sACN as the output protocol?
Top
janosvitok
Posts: 1274
Joined: Mon Apr 13, 2015 7:05 am
Location: Bratislava, Slovakia
Real Name: Jano Svitok
Contact:
Contact janosvitok

It's called E1.31 :)
Top
JasonB
Posts: 4
Joined: Fri Aug 26, 2022 11:06 pm
Real Name: Jason Block

AHHH....Okay. so I would simply select the option that corresponds with the IP address/Vlan of my other lighting equipment, correct?
Top
janosvitok
Posts: 1274
Joined: Mon Apr 13, 2015 7:05 am
Location: Bratislava, Slovakia
Real Name: Jano Svitok
Contact:
Contact janosvitok

Here are the full docs: https://www.qlcplus.org/docs/html_en_EN/e131plugin.html
I think in the main tab you select source network device, and in the setting you either select multicast or enter IP of your target device
Top
JasonB
Posts: 4
Joined: Fri Aug 26, 2022 11:06 pm
Real Name: Jason Block

It's working now! Thank you so much for the help!!
Top
Post Reply

Return to “Windows specific”