Akai APC40 MK2 Color Table

This is a place for sharing with the community the results you achieved with QLC+, as a sort of use case collection.
You can share photos, videos, personal hardware/software projects, interesting HOWTO that might help other users to achieve great results.
Post Reply
Brunoliv
Posts: 5
Joined: Sat Oct 06, 2018 6:34 pm
Real Name: Bruno Oliveira

For those who has an APC40 MK2 to controll QLC+ (like myself) and want to customize the lights on the pads, here is the color table with colors and ORIGINAL values (don't forget to multiply by 2 to make it work.)
akai_apc40mk2_colortable.jpg
Top
JayShay81
Posts: 2
Joined: Sun Dec 04, 2022 7:14 am
Real Name: Jason shaner

Would you able to tell me a little more about how to do this? Thanks!!
Top
User avatar
GGGss
Posts: 2732
Joined: Mon Sep 12, 2016 7:15 pm
Location: Belgium
Real Name: Fredje Gallon

You need above scheme for the feedback led's on the mentioned interface to work.
Say you want a button, when activated, in bright orange you have to choose value 096. Now multiply by 2 (QLC+ internal 8b values vs 7b midi values) = 192. Fill in this value in the custom feedback field for the VC button and you are set.
If 60% of the above does not light a light to you, I'm afraid you will have to touch many subjects...
All electric machines work on smoke... when the smoke escapes... they don't work anymore
Top
User avatar
djnikkofb
Posts: 13
Joined: Thu Dec 20, 2018 12:08 am
Real Name: nikko

on your input/output tab, select 'feedback'
Then when you map a button in virtual console, there's a small button just after you map the button to midi controller that says custom feedback. That's where you select high/low aka On/Off color.
DJ NIKKO - FLAVOREDBREAKS
SOUTH CAROLINA - EVENTS & ENTERTAINMENT DJ
- WEDREAMSC.COM - @DJNIKKOFB
Top
Post Reply

Return to “Community”