Page 1 of 1

setup OSC plugin Mapping

Posted: Wed Feb 21, 2018 12:08 pm
by mikewild
I have looked at the videos on how to setup the OSC plugin, which seems different layout than what I have.

Under Input/Output >> Mapping I have 4 OSC IP entries.
They are:
1. 10.0.0.12 (Ethernet of laptop)
2. 169.254.172.11 (No idea useless)
3. 192.168.1.11 (Wifi of laptop in home)
4. 172.0.0.1 (Local)

How do i configure OSC plugin with my Android tablet which is on IP: 10.0.0.43
I have tried clicked the spanner icon, and entered IP: 10.0.0.43 in to the Output Address boxes and have the correct ports set.

I'm trying to use mix16 profile, but no communication at all.
However, the touchOSC bride works which i do not want to use as there is no feedback

Any help would be appreciated

Re: setup OSC plugin Mapping

Posted: Thu Feb 22, 2018 12:40 am
by mikewild
Sorted.
I saw a ipad photo a member had posted.
Mimic to my android and it works. Solved
Midi bridge: none
HOST: my laptop

Then under osc in input/output select the laptop ip. And click the tool icon and change the outputs to the tablet ip.

Re: setup OSC plugin Mapping

Posted: Thu Jun 13, 2019 8:44 pm
by andersM
I'm wrestling with this.
I'm running QLC+ on my Laptop (and Raspi for that matter) and have Hexlers TouchOSC app installed on my Samsunng S7. The app won't find a host.

Now I tried what you did, opened the settings for the OSC plugin with my laptop's IP and put in the Phone's IP. No effect. I'm feeling stupid.

Re: setup OSC plugin Mapping

Posted: Sun Jan 16, 2022 9:16 pm
by djnikkofb
Did u reserve the ip address for both devices in your router configuration? This allows for the router to assign the ip address, and NOT give that ip address to any new connected device.