Q Light Controller+

Traktor user on On Windows 7

I have set Loopbe1 in Traktors Midi Out port using the Generic Midi Profile (Input is None)
Set the Midi Clock to send at 100ms
Then hit the Play button within the Meterone area.
All Ok

Then I QLC+ under Input & Output tab, I selected Loopbe1 as a Input.
The Joystick appeared.
I Opened the Virtual Console in QLC+ and started the music playing in Traktor.
All Ok

PROBLEM
Then I hit the Green play button in the Virtual Console and then some of the buttons began to flash at random, even the Stop All Functions Icon at the top was flashing.
I stopped the music playing and the buttons and icon continued flashing randomly.
The only way to stop the random flashing, is to stop Virtual Console or Stop Midi being sent from Traktor.

Q. Is this normal behavior? How can I stop the flashing / flickering?

Note: My lights do respond to Traktor even when the music is stopped. They respond to the Midi Clock which is fine.

Ok,
I have it sorted. I was triggering the button with the clock input.
I have now used a speed dial with the Input set to tap.

Now i need to figure out, how to switch off the speed dial when the clock input stops.