11 Universe Computer Case
Posted: Thu Mar 30, 2017 12:01 am
The lighting in my most recent PC build named Salive8 uses QLC+ to control the lighting.
The hardware of the system is a Bincolor BC-216 Art-Net Controller which has 16 x 5 volt x 3 Amp channels PLUS 2 DMX output universes.
http://www.bincolor.com/En/Pro_BC-216.html and I paired it with a Mean Well LRS-200-5 to supply power for the individually addressable RGB LED strips installed in aluminum extrusion throughout the Case.
The BC-216 controller and other hardware all worked perfectly out of the box with QLC+
16 on-board Art-Net universes was of course overkill, but I did manage to install fixtures to 11 universes.
I think my lighting adventure on Salivate started here - http://www.overclock.net/t/1470432/buil ... t_25704254
I made a short video - [youtube]https://youtu.be/C0FuM0jFcUs[/youtube]
The hardware of the system is a Bincolor BC-216 Art-Net Controller which has 16 x 5 volt x 3 Amp channels PLUS 2 DMX output universes.
http://www.bincolor.com/En/Pro_BC-216.html and I paired it with a Mean Well LRS-200-5 to supply power for the individually addressable RGB LED strips installed in aluminum extrusion throughout the Case.
The BC-216 controller and other hardware all worked perfectly out of the box with QLC+
16 on-board Art-Net universes was of course overkill, but I did manage to install fixtures to 11 universes.
I think my lighting adventure on Salivate started here - http://www.overclock.net/t/1470432/buil ... t_25704254