Q Light Controller+

After testing recent changes in slider monitor features I found a strange behavior. In the attached workspace I create 4 scenes this scenes controls dimmer fixtures.

Scene One with 2 dimmers first set to full, second set to zero.
Scene Two with 2 dimmers first set to zero, second set to full.
Scene One-1 with dimmer 1 set to full.
Scene Two-1 with dimmer 2 set to full.
Chaser OneTwo with scenes On and Two.
Chaser OneTwo-1 with scenes One-1 and Two-1

Virtual console
2 Sliders in monitor mode one per channel/dimmer.
Cue list OneTwo with scenes One and Two
Cue list OneTwo-1 with scenes One-1 and Two-1

Playing OneTwo cue list the sliders follow the values correctly, showing the values changing smoothly.
Playing OneTwo-1 cue list. When change to next step, the slider monitoring actual step falls to zero immediately, but the fixture monitor shows the correct values.

Is this the correct behavior?.

i confirm this bug in GIT .89 and I found another bug :
in second chaser (one two-1) if you press pause button during transitions it do not affect fading out scene

After some tests I found that using crossfade sliders on cuelist, the sliders monitoring channels work as expected.
OS: Xubuntu 16.04
QLC+ from GIT

I can confirm this on Xubuntu 14.04 64 Bit (Qt5).

Massimo, could you please have a look into this? I don't know about handling fade times and the monitoring feature. All I can say this issue is already present in 4.10.5b.