Color calibration for Tap&Go
Posted: Fri Jan 20, 2017 6:07 pm
Hello all,
we've recently rented some older LED washers, the tricky thing is they're not aywhere color accurate. E.g. the white color has a dominant blue ...
I was wondering whether there are any intentions to add a color correction for fixtures which would allow to define reachable ranges in the grid with the colors - e.g. by slightly moving the displayed colors into different directions.
?
Is the color chooser static or could it be easily modified - e.g. let's assume for a simple test case that there are NO red GREEN Leds but only red and blue
we've recently rented some older LED washers, the tricky thing is they're not aywhere color accurate. E.g. the white color has a dominant blue ...
I was wondering whether there are any intentions to add a color correction for fixtures which would allow to define reachable ranges in the grid with the colors - e.g. by slightly moving the displayed colors into different directions.
?
Is the color chooser static or could it be easily modified - e.g. let's assume for a simple test case that there are NO red GREEN Leds but only red and blue