ALMOST solved - color and color-picker not applied

Report an issue that you found while using QLC+ 5.x.
Please provide as many details as you can, a sample workspace if available and don't forget to read the forum posting guidelines first !
Post Reply
giacomo
Posts: 535
Joined: Tue May 26, 2015 6:17 pm
Real Name:

Hi,
when you locate the fixtures and you choose a color in color widget, either in the basic or full tab, the color selection is not applied but I've to manually change one of the rgb values to update it.
Here I've chosen a pure red in the basic tab, you can see that it show the right values in the full tab but it's not applied:
color.png
Same issue with the color picker in the fanning selector, here I've selected a red but it still show a pink color:
color selected.png
After moving one value in the rgb channels the color selection is updated:
color applied.png
linux/gnome, the last appimage built on May 3.
Last edited by giacomo on Tue May 07, 2024 6:56 pm, edited 2 times in total.
Top
giacomo
Posts: 535
Joined: Tue May 26, 2015 6:17 pm
Real Name:

file attached
Attachments
Aura_000.qxw
(8.85 KiB) Downloaded 4 times
Top
giacomo
Posts: 535
Joined: Tue May 26, 2015 6:17 pm
Real Name:

it seems solved yesterday, thanks.
Top
giacomo
Posts: 535
Joined: Tue May 26, 2015 6:17 pm
Real Name:

the white channel is not taken in account, if it's full it will stay full when you select a color.
Top
Post Reply

Return to “QLC+ 5 Issue reports”