Hi all -
I am running QLC on both a Windows HP Spectre x360 i5 and I have the RPI image for a Raspberry Pi 3.
I have a Yamaha MG10-XU mixer with USB audio interface and have searched high and low for a solution that will allow QLC to pick up the audio from the mixer and translate to the audio trigger widget. I have looked into midi clocks, bpm triggers, etc.
Any help would be appreciated
Linking QLC I/O to external USB audio
-
GGGss
- Posts: 2733
- Joined: Mon Sep 12, 2016 7:15 pm
- Location: Belgium
- Real Name: Fredje Gallon
Can the MG10-XU be used as an audio input when connected to your computer? Yes, you can now use the audio input and bind it to the audio widget of QLC+.
If you want to play music from your computer and use this signal as audio input for QLC+, you will face other problems and need some hardware tricks. This is because QLC+ needs exclusive access to the audio input signal.
If you want to play music from your computer and use this signal as audio input for QLC+, you will face other problems and need some hardware tricks. This is because QLC+ needs exclusive access to the audio input signal.
All electric machines work on smoke... when the smoke escapes... they don't work anymore