Hi folks,
I was searching a lot in the internet and in this forum but did not really find an answer to what I’m looking for (maybe due to the fact that I’m the only weird guy looking for it
![Sad :(](./images/smilies/icon_e_sad.gif)
).
I’m running QLC+ on a Win10 PC beside the media center in a home theater setup controlling the light scenes for the room. This all works like a charm
![Smile :)](./images/smilies/icon_e_smile.gif)
. As the whole setup is controlled by a home automation system to start and shutdown all devices in the right order I use to remote shutdown the PC as well. As QLC+ askes for confirmation when exiting this blocks the entire shutdown process. For sure one can use the “force” flag for shutdown but that’s not really the nice way from my perspective. A second scenario is that when the PC goes to suspend mode and wakes up again QLC+ loses connection to my USB DMX interface so the only way to re-establish it is to close QLC+ and restart it again. Due to the confirmation dialog this is a manual process. I therefore searched for possibilities with automation tools like AutoIt to press the “Yes” button automatically when closing QLC+ but this is close to impossible as there is no information on the controls from Qt applications which can be used by AutoIt to determine the handle of the buttons.
Therefore my question to the experts is if there is a way or option to allow QLC+ to exit without asking for confirmation.
Thanks a lot for your help