in option of slider enabled checkbox "catch up with the external controller input value"
after switch to operate mode
i send note + velocity from sequencer
only second and next sended notes change value
if "restart", switch to design and back to operate, the situation repeats itself.
if the manual value of the slider is greater than the value from midi - the position and value of the slider does not change.
Slider + midi = troubles
-
sbenejam
- Posts: 550
- Joined: Sun Apr 12, 2015 6:28 pm
- Real Name: Santiago Benejam Torres
- Contact:
In the QLC+ manual there is an explanation of this feature.
Catch up with the external controller input value
When enabled, this feature will help to control the slider with external controllers that do not support feedbacks or do not have motorized faders.
For example, when controlling a few sliders in different pages of a Frame with a single fader of an external controller, it's very easy to have "out of sync" positions when switching page.
When this option is enabled, an external controller fader should enter a certain threshold before the slider cursor starts to move, to guarantee a sync state and avoid undesired slider jumps.
Catch up with the external controller input value
When enabled, this feature will help to control the slider with external controllers that do not support feedbacks or do not have motorized faders.
For example, when controlling a few sliders in different pages of a Frame with a single fader of an external controller, it's very easy to have "out of sync" positions when switching page.
When this option is enabled, an external controller fader should enter a certain threshold before the slider cursor starts to move, to guarantee a sync state and avoid undesired slider jumps.