Hi I am quite new to QLC,
I am currently mapping custom fixture.
My LED PAR is 4-chan - ch1 000-189 dimmer 190-250 flash 251-255 no function
The 3 others are RGB 000-255
The issue I am having is the functionality of ch1 are no well interpreted/displayed on Fixture Monitor.
When simulated ch1 is seen as dimmer 000-255 meaning the fixture wont flash at 240
Is it possible to implement 3 functions to one single DMX channels
Thanks
Multiple functions to one single DMX channels
- GGGss
- Posts: 2732
- Joined: Mon Sep 12, 2016 7:15 pm
- Location: Belgium
- Real Name: Fredje Gallon
Combined channels are difficult to present itself in the fixture monitor.
Since strobe is a shutter behavior, on top of intensity values, this won't be possible.
You can use the 'Click & Go' https://www.qlcplus.org/clickandgo.html though. Right click on the channel values in scene editor... look for the little triangle
Since strobe is a shutter behavior, on top of intensity values, this won't be possible.
You can use the 'Click & Go' https://www.qlcplus.org/clickandgo.html though. Right click on the channel values in scene editor... look for the little triangle
All electric machines work on smoke... when the smoke escapes... they don't work anymore