Changing Gobo to colour does not work

The issues found when using the Virtual Console
Forum rules
Post Reply
matthew19150
Posts: 7
Joined: Wed Nov 20, 2019 10:47 am
Real Name: Matthew W

Hi all,

I have got a solo Frame setup in virtual console for 4 moving heads (Cameo NanoSpot 300) . This contains a slider for the dimmer and a number of buttons for each colour and gobo, each button is assigned to a scene. I have a problem where by I can't change the colours of the lights when I select a gobo. When I select a colour for example green and then click on one of the gobo buttons it changes to the gobo pattern, but then changes the colour back to white (default). There are 6 patterns and this only happens with 5 of them, for some reason the first pattern (circle) works fine.
Has anyone got any ideas? Any help will be much appreciated.
I have attached a screenshot of the console.
Thanks :)
Attachments
Screenshot 2021-12-01 114841.png
Top
keukenrol
Posts: 47
Joined: Thu Oct 01, 2020 5:50 pm
Location: Belgium
Real Name:

The definition of a solo frame is to have only 1 button active at the same time, so there is your problem. Make a solo frame for all your colors and a solo frame for your gobo's.
Top
matthew19150
Posts: 7
Joined: Wed Nov 20, 2019 10:47 am
Real Name: Matthew W

Thanks, that has sorted it. Much appreciated.
Top
Post Reply

Return to “Virtual Console”