BPM detection adn send to TAP

Ask a question about the usage of QLC+ with the Windows operating system
Forum rules
Post Reply
Johnnyx
Posts: 20
Joined: Wed Nov 28, 2018 10:11 pm
Real Name: Janis

Hello!

is there any simple way how to detect BPM from audio line-in and send to QLC+, TAP function
Top
User avatar
GGGss
Posts: 2732
Joined: Mon Sep 12, 2016 7:15 pm
Location: Belgium
Real Name: Fredje Gallon

at least you did the effort to post it to the right sub section - thank you...

Searching in this forum the answer would be: 'No there is not a simple way' but ...
All electric machines work on smoke... when the smoke escapes... they don't work anymore
Top
Johnnyx
Posts: 20
Joined: Wed Nov 28, 2018 10:11 pm
Real Name: Janis

ok then not easy way, I was try to get answer on this forum, but I wasn't find solution,
Top
TradeShowGeek
Posts: 3
Joined: Sat Dec 07, 2019 5:51 pm
Real Name: Greg Johnson

I was just looking for something else and saw your post. I just had to do this. So I used Mixxx, which is a free dj software to get the BPM for a song I was working on. I had to build my song at the front end with exact timing so the beat grid would line up when I put it into Q Light Controller. It does take a few minutes to set it up correctly but worth the extra work if you are programming extremely precise shows.

On the flip side it would be nice if we could adjust the starting point of the beat grid in Q Light Controller+

Good Luck

TSG
Top
prophy17
Posts: 109
Joined: Tue Apr 09, 2019 9:24 pm
Real Name: Vladimir

Os2l plugin can send bpm to QLC+. Code 8342.
Top
Post Reply

Return to “Windows specific”