NO issue (so far)

Report an issue that you found while using QLC+ 5.x.
Please provide as many details as you can, a sample workspace if available and don't forget to read the forum posting guidelines first !
Post Reply
User avatar
GGGss
Posts: 2750
Joined: Mon Sep 12, 2016 7:15 pm
Location: Belgium
Real Name: Fredje Gallon

to stipulate Massimo's efforts this little picture of my living room tonight - fooling around with '5'
(and yes touch & multi-touch; multi display's (2nd with touch), ... etc
nothing to report YET

EnJoY
2018-03-06 22.52.24.jpg
All electric machines work on smoke... when the smoke escapes... they don't work anymore
Top
User avatar
mcallegari
Posts: 4528
Joined: Sun Apr 12, 2015 9:09 am
Location: Italy
Real Name: Massimo Callegari
Contact:
Contact mcallegari

But from your photo it seems QLC+ 4 is running !
Where's the trick ? :)
Top
User avatar
GGGss
Posts: 2750
Joined: Mon Sep 12, 2016 7:15 pm
Location: Belgium
Real Name: Fredje Gallon

Yes a little bit unlucky shot - QLC+ 4 was running vs QLC+ 5 (I had to cheat for DMX addresses)
All electric machines work on smoke... when the smoke escapes... they don't work anymore
Top
Post Reply

Return to “QLC+ 5 Issue reports”