Network crash after start in the 3 universe

All the topics related to QLC+ on the Raspberry Pi
Post Reply
ted
Posts: 11
Joined: Thu Mar 03, 2016 5:44 pm
Real Name:

Hello Guys,

i have a big problem by starting the rasp with QLC+ about 2 Universes.

If i connect about 2 Universes in the rasp my overall netwerk inkluded wlan is down and I can not do anything anymore
bevore i cut the line to the rasperry.
the rasperry must then be re-recorded because when I connect it to the network immediately the network completely fails.

When i start the universes on PC then it runs without problems.

I still have a desire to adjust in the program, I work with different pixels, unfortunately, not all settings to the color are possible, that is the drive in the same universe very disturbing.

RGB
RBG
BRG
BGR
GBR
GRB
Post Reply