No more audio devices in QLC+

All the topics related to QLC+ on the Raspberry Pi
Post Reply
Scully
Posts: 11
Joined: Thu Nov 10, 2016 12:13 pm
Real Name: Jiri Bednar

Hi, I'm having a problem with the audio devices. I have 3 devices in Raspberry 3, but they do not show up in QLC +. The version is 4.11.0 GIT.
Attachments
PrtScr capture.jpg
User avatar
mcallegari
Posts: 4462
Joined: Sun Apr 12, 2015 9:09 am
Location: Italy
Real Name: Massimo Callegari
Contact:

Which image are you using ?
That's clearly not my image. Please provide all the information if you want help
Scully
Posts: 11
Joined: Thu Nov 10, 2016 12:13 pm
Real Name: Jiri Bednar

I have this version: qlcplus-qt5-git_4.11.0.20170507.dc48f42-0_armhf.deb. I sent a donation (15EU). I got a link to download the current version, but this version will not run at all. Fixture editor will show something, but it's also not working.
Attachments
PrtScr capture.jpg
User avatar
mcallegari
Posts: 4462
Joined: Sun Apr 12, 2015 9:09 am
Location: Italy
Real Name: Massimo Callegari
Contact:

Again, you're not providing all the information needed:

1- where did you get that deb file ? That's not the name of the package I provide
2- which image are you using ? (Raspbian Wheezy, Jessie, Stretch, ??)
3- Which Qt version is installed in the image you're using ?
4-
I got a link to download the current version, but this version will not run at all.
What does this even mean ? What is not working ? What did you see ?
Scully
Posts: 11
Joined: Thu Nov 10, 2016 12:13 pm
Real Name: Jiri Bednar

1. I downloaded from GIT source files and compile it (According to instructions from the web)
2. jessie 4.9.35-v7+
3.QT5
4.The QLC + version of the email will not display anything. I will run and nothing.

Thanks for your patience, I'm not a Linux expert.
Scully
Posts: 11
Joined: Thu Nov 10, 2016 12:13 pm
Real Name: Jiri Bednar

Alternatively, you can connect through Teamviewer to the raspberry desktop.
User avatar
mcallegari
Posts: 4462
Joined: Sun Apr 12, 2015 9:09 am
Location: Italy
Real Name: Massimo Callegari
Contact:

Sorry but I can't give support to custom built versions. You say you're not a Linux expert but you built QLC+ from sources yourself...wow.
Qt5 is still too generic. There are like 20 versions out there.

My image has to work out of the box on a Raspberry Pi 3. If it doesn't then it means something went wrong when flashing it on the SD card. Are you sure you have properly followed the instructions ?
You should see at least the Pi boot splash screen (a colorful square on the TV) or the kernel boot messages.
Scully
Posts: 11
Joined: Thu Nov 10, 2016 12:13 pm
Real Name: Jiri Bednar

I will try to reinstall raspberian, thanks so far.
Scully
Posts: 11
Joined: Thu Nov 10, 2016 12:13 pm
Real Name: Jiri Bednar

I installed jessie 4.4.50-v7 + (downloaded from the official raspberry site), I installed qlc + 4.11 from the email (donation). But qlc + will not run at all. What is the installation procedure for the new system installation? What do you need to install? I'm sorry for my ignorance, but I have not found any instructions. Do I need to install qt5 again? What version of raspbian qlc + is running on?
User avatar
mcallegari
Posts: 4462
Joined: Sun Apr 12, 2015 9:09 am
Location: Italy
Real Name: Massimo Callegari
Contact:

What is the installation procedure for the new system installation?
Chapter 10 of the provided PDF
What do you need to install?
Chapter 10 of the provided PDF
I'm sorry for my ignorance, but I have not found any instructions.
Chapter 10 of the provided PDF
Do I need to install qt5 again?
Chapter 10 of the provided PDF. Yes.
What version of raspbian qlc + is running on?
Jessie. It's written here: http://www.qlcplus.org/raspberry.html, In chapter 2 of the provided PDF, and in the name of the PDF itself.

Dude, your issue is that you refuse to read the instructions.
Therefore, my help ends here, cause this is a waste of my time.
Scully
Posts: 11
Joined: Thu Nov 10, 2016 12:13 pm
Real Name: Jiri Bednar

Ah sorry, I did not look for a manual installation. Previously, just install the package. Now it's ok.
Post Reply