That's the typical message of QLC+/Qt running on the wrong platform.
Are you sure you're using a Raspberry Pi 2 ?
Are you sure the image is OK (did you check the MD5 ?) and that you haven't done any modifications to it ?
No access to qlc+ webinterface
-
mcallegari
- Posts: 4481
- Joined: Sun Apr 12, 2015 9:09 am
- Location: Italy
- Real Name: Massimo Callegari
- Contact:
-
zerbcx
- Posts: 6
- Joined: Mon Sep 19, 2016 11:22 am
- Real Name: Jens Zerb
....shame on me. I'm really very sorry that I have annoyed you. It was the Raspbery... 
I was very very sure that I used a R2B.. but is was a R B+ V1.2
Because of te 4 USB Ports and the HDMI Port I was sure it was an R2B....sorry sorry sorry...
R3b is ordered and arrived today...
I was very very sure that I used a R2B.. but is was a R B+ V1.2Because of te 4 USB Ports and the HDMI Port I was sure it was an R2B....sorry sorry sorry...
R3b is ordered and arrived today...
-
mcallegari
- Posts: 4481
- Joined: Sun Apr 12, 2015 9:09 am
- Location: Italy
- Real Name: Massimo Callegari
- Contact:
That's OK.
In any case the next image will run on all the 4 RPi models
In any case the next image will run on all the 4 RPi models