Cheap ebay pin spot fixture request please

Request a fixture definition here
Post Reply
DJPoppyD
Posts: 24
Joined: Fri Apr 28, 2017 10:36 pm
Real Name: Dave Fragar

While i will try to write my own fixture file would be great for an expert to also have a go please to see if i get it close to right. thanks all in advance

http://www.ebay.com.au/itm/352024817615 ... EBIDX%3AIT
Attachments
ebay pin spot.pdf
(745.4 KiB) Downloaded 71 times
DJPoppyD
Posts: 24
Joined: Fri Apr 28, 2017 10:36 pm
Real Name: Dave Fragar

this is what
i tried to do but it only take up one channel not six
what did i do wrong

thanks again
Attachments
Ebay-Pin-spot-pin-spot.qxf
(2.84 KiB) Downloaded 117 times
mlohrey
Posts: 243
Joined: Mon Apr 20, 2015 5:07 am
Real Name: Mark Lohrey

Looks OK to me.

I added it to a workspace and it shows correctly with an address range of 1 - 6

You can also check your fixtures here: http://www.qlcplus.org/fixture_validator.php

You just need to add the mass and dimensions to the physical characteristics as a final tweak.
DJPoppyD
Posts: 24
Joined: Fri Apr 28, 2017 10:36 pm
Real Name: Dave Fragar

thanks for input refined version here
Attachments
Ebay-Pin-spot-pin-spot.qxf
(2.83 KiB) Downloaded 195 times
DJPoppyD
Posts: 24
Joined: Fri Apr 28, 2017 10:36 pm
Real Name: Dave Fragar

still reporting only sitting on one channel on my system
DJPoppyD
Posts: 24
Joined: Fri Apr 28, 2017 10:36 pm
Real Name: Dave Fragar

took the file to PC that runs the lights and it reported it as a 6 channel fixture
set up a simple test show with one light on DMX ch1-6 and it all worked as it should
thanks for all the help - very happy - another step in my QLC+ adventure
:D
Post Reply