How to assign fixtures to the same address

Archive of the non-categorized posts related to the QLC+ technical support.
Please do not create new threads here, instead, use the categories above !
Post Reply
yokosuna
Posts: 204
Joined: Tue Mar 22, 2016 9:07 am
Real Name:

Hi, I want two fixtures to have the same DMX address - how can I achieve this ?
Thank you.
Flo
Posts: 27
Joined: Sun Jun 28, 2015 6:14 am
Real Name: Florian

yokosuna wrote:Hi, I want two fixtures to have the same DMX address - how can I achieve this ?
Thank you.
Just set the (physical) fixtures to the same DMX address. There is no need (and no possibility) to create the fixture two or more times in QLC+ because it is not possible to set the fixtures to different values if they share the same address. If you want to make it more clearly that the one fixture in QLC+ represents two or more physical devices just rename it (e. g. "LED PAR (x6)").
yokosuna
Posts: 204
Joined: Tue Mar 22, 2016 9:07 am
Real Name:

Thank you and I see your point.
Why do I ask this question ? Well, I thought about using the "threshold" in the dimmer curve to
use it with EFX to achieve some dimmer toggle effects that are in sync with movements....
Maybe I need to look at the "loopback" feature....
Post Reply