RGB MAtrix addressing

Archive of the non-categorized posts related to the QLC+ technical support.
Please do not create new threads here, instead, use the categories above !
Post Reply
ratswallow
Posts: 4
Joined: Tue May 19, 2015 9:32 pm
Real Name: Rick Willett

RGB MAtrix addressing

Post by ratswallow » Thu Mar 10, 2016 10:49 pm

Is it possible to set up an RGB MAtrix with the addresses starting on the top Left and going by columns instead of rows?
For use with the Chauvet Motion Orb...they address by column instead of row, so 1st column to is ADDR 1, next pixel down is 4, 7, 10 etc...next column starts at the top again with 34 I believe.
I see options to change the start and switch between serpentine and colums, but the addresses all go across the top row instead of down.
Am I Missing something?

OddSocks
Posts: 114
Joined: Tue Apr 14, 2015 11:33 am
Real Name: Tim Cullingworth

Re: RGB MAtrix addressing

Post by OddSocks » Fri Mar 11, 2016 8:10 am

Hi,

There isn't an option for this at the moment but I am looking at trying to get this to work.

At the moment you can click on the RGB panel in the fixture list and then move elements around on the grid buy dragging them.

Post Reply