Virtual console button assign, can you do question

Archive of the non-categorized posts related to the QLC+ technical support.
Please do not create new threads here, instead, use the categories above !
Post Reply
Screwy39
Posts: 7
Joined: Mon Feb 22, 2016 9:12 am
Real Name: Jack Jones

Virtual console button assign, can you do question

Post by Screwy39 » Wed Mar 09, 2016 2:40 pm

Hi all,
I'm playing around with qlc+, and having fun. Ive got to the stage where i want to design a virtual console for operating/editing. What i would like to do and don't know how is, put on a 5 x 5 button matrix, number them 1-25 i want to use them to select 25 fixtures for editing. So lets say all fixtures are led pars, 4 dmx channels. Button number 1 is fixture address 1-4, button 2 is fixture address 5-8, button 3 is fixture address 9-12 and so on. I want to be able to easily select the fixtures via single buttons and then control them via a row of colour buttons. If i have 10 movers with 12 channels each that's a lot of buttons. As oppose to less and selecting individual or groups then changing the channel parameters for selected fixtures etc.. Is that possible?
hopefully that's clear as mud.
Thanks in advance for any advice.

janosvitok
Posts: 841
Joined: Mon Apr 13, 2015 7:05 am
Location: Bratislava, Slovakia
Real Name: Jano Svitok
Contact:

Re: Virtual console button assign, can you do question

Post by janosvitok » Wed Mar 09, 2016 4:26 pm

This is not possible now, but hopefully will be in the next major version, qlc+ 5.

Post Reply