Q Light Controller+

OK ... nothing..here are screen shots of my screens. And I also tried to use "global channel" and still nothing. And there are 12 pads not 16.

mumbles wrote:Sounds good

Would you mind shairing shairing your QLC file

Which ones...all 3?

mumbles wrote:Would you mind shairing shairing your QLC file

Your *.qwx QLC workspace file

Sound Choice wrote:Which ones...all 3?

https://www.dropbox.com/s/kmtvul4voaa6j2n/2016.qxw?dl=0

BTW thanks for your help! I am usually the one helping people on other forums but midi is kinda new to me.

Your welcome

Sound Choice wrote:https://www.dropbox.com/s/kmtvul4voaa6j2n/2016.qxw?dl=0

BTW thanks for your help! I am usually the one helping people on other forums but midi is kinda new to me.

Pad Behavior should be momentary if you are using True scene function button in virtual console QLC will handle the toggleing not nanoPAD.

Global MDI Channel: 1
Velocity Curve: Nornal
BPM: 120
Midi Clock: Auto

mumbles wrote:Pad Behavior should be momentary if you are using True scene function button in virtual console QLC will handle the toggleing not nanoPAD.

Global MDI Channel: 1
Velocity Curve: Nornal
BPM: 120
Midi Clock: Auto

changed Pad Behavior to "Momentry". saved it to the nano and still nothing.

Im looking over your VC right now

Do you see a joystick in universe settings when you press nanoPAD buttons?

like the one on the right side of pic?

The only time the joystick icon comes up is if I use the XY pad. With the buttons...nothing.

mumbles wrote:Do you see a joystick in universe settings when you press nanoPAD buttons?

like the one on the right side of pic?

Disregard the settings in that picture it is strictly to demonstrate the joystick feedback indicator

I am using a enttec dongle for my DMX (output) and the Nano pad as the input device. There is also a "NANOpad CTRL" which is not assigned to anything.

mumbles wrote:Disregard the settings in that picture it is strictly to demonstrate the joystick feedback indicator

To test more I will need your light profiles for
Sound Choice 6 channel par
Sound Choice 7 channel Par
Microh impossable LED
Microh Spitfire RGB


What happens if you set Roll/Flam Enable to Enable and set global velocity curve to const and const velocity value to 127

Sorry nothing happens still.

mumbles wrote:To test more I will need your light profiles for
Sound Choice 6 channel par
Sound Choice 7 channel Par
Microh impossable LED
Microh Spitfire RGB


What happens if you set Roll/Flam Enable to Enable and set global velocity curve to const and const velocity value to 127

And the last one. BTW the Sound Choice ones are just generic pars. I did the profiles myself.

I solved the problem. It turns out that the issue was not QLC or the Nano Kontrol software but the Nano pad itself. Found a video on youtube how to fix it and it is warking awesome now Thanks Mumbles for your help and patience.

That's great to hear you got it working !

Can you share the video here so people who encounter this issue get to know how to fix it ? Thanks

plugz wrote:Can you share the video here so people who encounter this issue get to know how to fix it ? Thanks

https://www.youtube.com/watch?v=spfYhzyjP6g