[RESOLVED] Monitor is not working with only one type of fixture

Generic issues not specifically related to a QLC+ area.
Post here only if you can't really find the reason of an issue
Post Reply
christophe17000
Posts: 2
Joined: Sat Dec 02, 2017 1:40 pm
Real Name: Christophe Philip

[RESOLVED] Monitor is not working with only one type of fixture

Post by christophe17000 » Sat Dec 02, 2017 1:52 pm

Hi,
My project is composed of 12 ADJ fixtures (4 DOTZ PAR, 2 5P HEX and 6 MEGA TRI PAR profil plus). In the monitor, they works well exept the 5P HEX. You can try to modify R, G or B channel according to the dimmer channel but nothing happen on the monitor.
Do you have an idee ?
My QLC+ is a 4.11.1 one operated on windows 10.
Christophe
Attachments
American-DJ-5P-Hex.qxf
Fixture which is not working well in the monitor
(10.01 KiB) Downloaded 4 times
Salle BAILLAC.qxw
Project
(69.16 KiB) Downloaded 3 times
Last edited by christophe17000 on Mon Dec 04, 2017 10:49 am, edited 1 time in total.

janosvitok
Posts: 850
Joined: Mon Apr 13, 2015 7:05 am
Location: Bratislava, Slovakia
Real Name: Jano Svitok
Contact:

Re: Monitor is not working with only one type of fixture

Post by janosvitok » Sat Dec 02, 2017 10:46 pm

Remove color from "Off" value in the Color Macro channel in the fixture definition. When "Off" value is assigned #000000, black overrides RGB channels.

janosvitok
Posts: 850
Joined: Mon Apr 13, 2015 7:05 am
Location: Bratislava, Slovakia
Real Name: Jano Svitok
Contact:

Re: Monitor is not working with only one type of fixture

Post by janosvitok » Sat Dec 02, 2017 11:04 pm


christophe17000
Posts: 2
Joined: Sat Dec 02, 2017 1:40 pm
Real Name: Christophe Philip

Re: Monitor is not working with only one type of fixture

Post by christophe17000 » Mon Dec 04, 2017 10:47 am

Thank you !
It works fine now.
Christophe

Post Reply