Community videos using QLC+

This is a place for sharing with the community the results you achieved with QLC+, as a sort of use case collection.
You can share photos, videos, personal hardware/software projects, interesting HOWTO that might help other users to achieve great results.
sketron
Posts: 10
Joined: Thu Oct 15, 2015 9:44 am
Location: Italia
Real Name: marco

Craounch wrote:Hi, I recently used QLC+ to program 3 shows for the prom night of my school. I shot the show from the control room which was behind the stage, so the point of view is not perfect, but you can see globally how it looked like. :oops:
Equipment : 4 x ROGUE R2 Spot and 12 x MARTIN RUSH Par 2 RGBW+Zoom (+ Unique 2.1 for the fog).

I think it's a good example of what you can do with QLC+. It took me one week to program the 3 shows, and I did'nt program any before.
NB : I only based my show on the music, as I could'nt see the cheerleaders dance before. And when the stage is black on the video, in fact you could see a bit during the show, but my camera wasn't sensitive enough. :(

Thanks for any comment ! :D
PS : I attach the workspaces, feel free to reuse it if you want.
Thanks so much for have shared your project! I'm going to learn how to organize the interface and you do it very well.

Hi
User avatar
mcallegari
Posts: 4446
Joined: Sun Apr 12, 2015 9:09 am
Location: Italy
Real Name: Massimo Callegari
Contact:

Hi Craounch, thanks for sharing your experience. That's indeed a good example of the usage of the Show Manager.
User avatar
karrika
Posts: 60
Joined: Tue May 12, 2015 6:50 am
Real Name: Karri Kaksonen

Hi Craounch,

thanks for sharing. It is obvious that the lights were programmed before you saw the dancers as you said in your comment. The lights are pretty much stealing the show, things like this happens. But the lights go well with the music.

--
Cheers,
Karri
b_art
Posts: 2
Joined: Thu Jul 09, 2015 1:34 pm
Real Name: Bart P

Hi,

First I want to say that I love the QLC+ software!
I made this video a couple of months ago with the showmanager. Here is the result:

User avatar
mcallegari
Posts: 4446
Joined: Sun Apr 12, 2015 9:09 am
Location: Italy
Real Name: Massimo Callegari
Contact:

Very nice one, thanks for sharing !
mattboston
Posts: 5
Joined: Thu Oct 22, 2015 10:39 am
Real Name: Matt S

A few months back I posted about what software/interfaces to use for a small pre-service Christmas light show. Here's the final result. Note, other than using a few lights (Chauvet 4Bar Tri's) for some DJ gigs and set them on sound mode, I've never programmed lights before(I'm a sound engineer, not a light engineer). Also there were a few songs programmed but this was the one that came out best. The final project used the following:

- QLC+
- Enttec Open DMX USB
- 2x Chauvet 4Bar Tri's
- 2x ADJ Ultrabar 12
- 2x Chauvet LED Par64 Tri-B
- 30x small generic brand RGB pars
- ADJ DynoFog II (used for smoke to come out of chimney)
- Froggy's Fog Snow Machine (coincidentally it was the only snow on Christmas Eve)

Also created the display box in a mid-century modern Christmas theme, was made from wood frame, with foam board as dividers and frosted plexiglass front.

User avatar
mcallegari
Posts: 4446
Joined: Sun Apr 12, 2015 9:09 am
Location: Italy
Real Name: Massimo Callegari
Contact:

mattboston wrote:A few months back I posted about what software/interfaces to use for a small pre-service Christmas light show. Here's the final result. Note, other than using a few lights (Chauvet 4Bar Tri's) for some DJ gigs and set them on sound mode, I've never programmed lights before(I'm a sound engineer, not a light engineer). Also there were a few songs programmed but this was the one that came out best.
Hi, thanks for sharing !
I hope you don't mind if I moved your post here. It seemed like the most appropriate place to me
mattboston
Posts: 5
Joined: Thu Oct 22, 2015 10:39 am
Real Name: Matt S

mcallegari wrote:
mattboston wrote:A few months back I posted about what software/interfaces to use for a small pre-service Christmas light show. Here's the final result. Note, other than using a few lights (Chauvet 4Bar Tri's) for some DJ gigs and set them on sound mode, I've never programmed lights before(I'm a sound engineer, not a light engineer). Also there were a few songs programmed but this was the one that came out best.
Hi, thanks for sharing !
I hope you don't mind if I moved your post here. It seemed like the most appropriate place to me
Ok, thank you very much. And thank you for working on QLC+
Krsound
Posts: 141
Joined: Sun May 31, 2015 4:42 am
Location: USA
Real Name: Kyle Sims
Contact:

I have attached the like to the winter dreams Christmas show I made with qlc and Resolume.
15 universes 2700 ish points of control.
- 6, 7x15w rgbw moving heads modified lens to beam
- 500 pixel half ball pixels
- 400 pixel strings w2801 and w2811
- 2 30w spot moving heads
- 2 Christie projectors and one Dell short throw projector
- 2 custom pc builds one with QLC+ and one with Resolume
- 1 pixlite 16, light o Rama 16ch dimmer and a China 12ch relay board
- 4 Martin fog machines
- 10 led pars 4 modified for the fog machines
- 2 snow machines
- 4 propane flame shooters 1 130psi flame cannon ( you will see it in the celebrate show)
- 1 rain nozzle.
I will take picture in the next week of controllers and upload
User avatar
mcallegari
Posts: 4446
Joined: Sun Apr 12, 2015 9:09 am
Location: Italy
Real Name: Massimo Callegari
Contact:

Krsound wrote:I have attached the like to the winter dreams Christmas show I made with qlc and Resolume.
Hey Kyle, thanks for sharing !
You have done an excellent job there ! Loved to see the RGB animations in action on such a big matrix :)

I hope you don't mind if I moved your post here. It seemed like the most appropriate place to me
Krsound
Posts: 141
Joined: Sun May 31, 2015 4:42 am
Location: USA
Real Name: Kyle Sims
Contact:

2015 Christmas celebrate show
https://youtu.be/TLuE9nxtWmU
User avatar
jadaudiodesign
Posts: 35
Joined: Wed Jun 17, 2015 5:33 pm
Location: Switzerland Geneva
Real Name: Jean-Daniel Garcia
Contact:

hey everyone just for share

https://www.youtube.com/user/jadaudiodesign/videos

++ JD
Ovis
Posts: 65
Joined: Thu May 28, 2015 2:00 pm
Real Name: Ovidijus

QLC+ and apc mini. Had great time :)
MBP 13 i5 8 GB OS X El Capitan
ENTTEC PRO Mk2
AKAI APCmini

User avatar
mcallegari
Posts: 4446
Joined: Sun Apr 12, 2015 9:09 am
Location: Italy
Real Name: Massimo Callegari
Contact:

Nice one, thanks for sharing Ovidijus
ahiezerCCISPS
Posts: 17
Joined: Tue Nov 17, 2015 4:53 pm
Real Name: Ahiezer Josue Cardona

I´ve got a concert during November, tell me what you think!!! :D :D :D :D
b_art
Posts: 2
Joined: Thu Jul 09, 2015 1:34 pm
Real Name: Bart P

I made a new show this year. QLC+ is perfect for this.

ethanm3
Posts: 37
Joined: Mon Dec 28, 2015 2:50 am
Real Name: Ethan Moses

Here's my Christmas light show controlling about 900 pixels with QLC+. I used Show mode to program alongside the song "Miraculum" by Lincoln Brewster.



Used P9813 pixel strings, some with ping pong balls attached.

Enjoy! Thanks to QLC+ creators for making this possible!

Ethan Moses
Savory Lighting Design
Portland, OR, USA
Ethan Moses
Founder / Manager
Savory Lighting Design
www.savorylights.com
User avatar
mcallegari
Posts: 4446
Joined: Sun Apr 12, 2015 9:09 am
Location: Italy
Real Name: Massimo Callegari
Contact:

ethanm3 wrote:Here's my Christmas light show controlling about 900 pixels with QLC+. I used Show mode to program alongside the song "Miraculum" by Lincoln Brewster.
Used P9813 pixel strings, some with ping pong balls attached.
Enjoy! Thanks to QLC+ creators for making this possible!
Excellent job Ethan ! I enjoyed it very much ! Thanks for sharing.

I would also like to add that Ethan has designed an almost 70MB project with QLC+, on macOS and focusing on a Show synced to music.
I hope this tells something to everyone saying QLC+ on macOS or the Show feature are unreliable...
User avatar
fooschnickens
Posts: 73
Joined: Fri Aug 14, 2015 2:39 am
Real Name: Taylor

Kinda late in posting this, handled Audio and Video for a gaming tournament a couple months ago. It was a smaller amount of fixtures than we normally utilize, and QLC worked a treat for the stage and room lighting. Used wireless DMX receivers for the color tubes placed around the perimeter of the room, had no issues at all with interference!



Image
juski
Posts: 50
Joined: Wed Jun 24, 2015 10:28 pm
Real Name: Justin Hornsby

I use QLC+ in my mobile disco setup for a variety of LED based lights. I don't yet have an external controller so find myself switching between Mixxx & QLC+ all the time. Here's a vid from a prom I DJ'd in August:

https://www.youtube.com/watch?v=m557m0BoX6w
Post Reply