QLC+ Comes to Bacon Ball!

This is a place for sharing with the community the results you achieved with QLC+, as a sort of use case collection.
You can share photos, videos, personal hardware/software projects, interesting HOWTO that might help other users to achieve great results.
Post Reply
Posts: 37
Joined: Mon Dec 28, 2015 2:50 am
Real Name: Ethan Moses

QLC+ Comes to Bacon Ball!

Post by ethanm3 » Tue May 16, 2017 6:33 am

I produce electronic music events in Portland, Oregon, USA, and through putting on these events over the past few years I have taught myself lighting design. QLC+ has been a huge part of that learning, and I'm really excited to show you the most recent event! I used QLC+ to run about 2000 RGB pixel bars I made, alongside some moving heads and a laser! This was very exciting to put together, and in the end I ran out of time to prepare the show as much as I would have liked for full control, but the end product was still pretty fun.

Video: https://drive.google.com/open?id=1DKhIo ... jBEJWby1LQ

Universe 1: 4 Elation Platinum Beam 5R, 4 Chauvet Intimidator Trio, 1 X-Laser Caliente RGB700
Universes 2-17: Art-Net out to Advatek Rugged 4 controller (16 Art-Net/E1.31 universe LED controller - highly recommend for using for pixels with QLC+ or Resolume)
Ethan Moses
Founder / Manager
Savory Lighting Design

Posts: 5
Joined: Sat Jan 28, 2017 1:52 am
Real Name: Mark Z

Re: QLC+ Comes to Bacon Ball!

Post by markzvo » Sun Sep 24, 2017 6:21 pm

Very nice - proof that there are more than 4 universes available for use with QLC+

User avatar
Posts: 231
Joined: Mon Sep 12, 2016 7:15 pm
Location: Belgium
Real Name: Fredje Gallon

Re: QLC+ Comes to Bacon Ball!

Post by GGGss » Sun Sep 24, 2017 9:21 pm

WTH ... very very nice setup ... the star-idea ;-)

? Question -> was the vid sync'd with the rest of your show?
All electric machines work on smoke... when the smoke escapes... they don't work anymore

Post Reply