Self-service light control in small club ... that's a first (?)

This is a place for sharing with the community the results you achieved with QLC+, as a sort of use case collection.
You can share photos, videos, personal hardware/software projects, interesting HOWTO that might help other users to achieve great results.
Post Reply
User avatar
DESIGNFactory
Posts: 18
Joined: Tue Jul 19, 2016 1:50 pm
Location: Greece
Real Name: John Yiannikakis
Contact:

Self-service light control in small club ... that's a first (?)

Post by DESIGNFactory » Sun May 07, 2017 8:32 pm

Hi community, so ......... a small club requested to install some lights and let the bartender-manager control them at will (!)
only qlc+ could do it:
- made new fixture definitions (as the moving heads were new models)
- made a friendly user interface on qlc+
- run on club's laptop with an enttec usb-dmx

2x moving head spots
1X moving head wash with 2 sided light
led bar wall wash running matrix fx and RGB with dimming

...the following video is from the first night we installed them
both guests and staff are happy with the result ... keep on the good work QLC+ ! :)

https://www.facebook.com/Kam1600CafeBar ... 361941838/

EricE
Posts: 4
Joined: Sun Apr 09, 2017 7:41 pm
Real Name: Eric E

Re: Self-service light control in small club ... that's a first (?)

Post by EricE » Thu May 11, 2017 10:28 pm

Nice!

Did the laptop have a touch screen - if so did you utilize it?

User avatar
DESIGNFactory
Posts: 18
Joined: Tue Jul 19, 2016 1:50 pm
Location: Greece
Real Name: John Yiannikakis
Contact:

Re: Self-service light control in small club ... that's a first (?)

Post by DESIGNFactory » Fri May 19, 2017 8:50 pm

the club's laptop did not have a touch screen
...but my laptop that i used to setup and show them how to use it has a touch screen
both the Dj and the manager told me that they will get a touch screen laptop ASAP ! :)

Post Reply