Chroma-Q Color Force II 72

Here you can share your fixture definitions with the community
Post Reply
jaymez
Posts: 2
Joined: Tue Aug 29, 2017 7:26 pm
Real Name: jaymez

Hello,

I'm starting to build a fixture profile for this pretty amazing light bar that I get to work with next week. One of the best parts is the pixel mapping and each LED is individually controllable (up to 24). For simplicity sake, I'll probably run them in groups of 4 (6 sections) or in skp3 mode. The issue I'm having is getting QLC to recognize each pixel group when building effects. Currently it's only seeing the fixtures as a single fixture instead of as 4 "separate" lights. I've attached the manual and the profile I've started to build. Any insight would be much appreciated!

http://www.chroma-q.com/support/manuals ... Manual.pdf

thanks!

jaymez
Chroma-Q-Color-Force-72.qxf
(5.01 KiB) Downloaded 144 times
User avatar
GGGss
Posts: 2661
Joined: Mon Sep 12, 2016 7:15 pm
Location: Belgium
Real Name: Fredje Gallon

You have to define 'heads' in your fixture profile.
With this QLC+ knows that the unit has multiple light sources.
See http://qlcplus.org/docs/headeditor.html
All electric machines work on smoke... when the smoke escapes... they don't work anymore
jaymez
Posts: 2
Joined: Tue Aug 29, 2017 7:26 pm
Real Name: jaymez

Hey!

forgot so say thank you for this! It worked out great! The fixtures run wonderfully with QLC+, I'm such a fan of this software!
Post Reply