Marq Gesture Wash & Gesture beam 102 - ALL modes

Here you can share your fixture definitions with the community
Post Reply
User avatar
DESIGNFactory
Posts: 28
Joined: Tue Jul 19, 2016 1:50 pm
Location: Greece
Real Name: John Yiannikakis
Contact:

[ UPDATE - added all channel modes ( 22-15-7-3ch) and the similar Gesture wash model ]

Gesture Wash 102
2-sided Moving Head Wash - Wide 38.5° beam angle
http://www.marqlighting.com/products/vi ... e-wash-102
MANUAL:
http://0ab2dada4ff5ab031e87-2647250b48e ... 20v1.1.pdf

Gesture Beam 102
2-sided Moving Head Beam - 3.4° beam angle
http://www.marqlighting.com/products/vi ... e-beam-102
MANUAL:
http://0ab2dada4ff5ab031e87-2647250b48e ... 20v1.1.pdf

Independent RGBW Color mixing for each side
Continuous Pan & Tilt for endless rotation on both axes
Attachments
Marq-Gesture-wash-102.qxf
(13.15 KiB) Downloaded 37 times
Marq-Gesture-beam-102.qxf
(13.15 KiB) Downloaded 34 times
User avatar
mcallegari
Posts: 4462
Joined: Sun Apr 12, 2015 9:09 am
Location: Italy
Real Name: Massimo Callegari
Contact:

Fixed and added, thanks.
When there is only one head, you don't need to define it. QLC+ will do it for you.
Since the 2 fixtures were identical except for physical information (which was wrong anyway), I merged them and made a single fixture for Beam and Wash
User avatar
DESIGNFactory
Posts: 28
Joined: Tue Jul 19, 2016 1:50 pm
Location: Greece
Real Name: John Yiannikakis
Contact:

cool :D thanks Massimo, just played around with the heads cause with 2 sided light heads i didn't know what to do so i was experimenting :)
after installing the lights, i understood it was a wrong approach from me anyway ....2 heads stop the light from moving, sorry i forgot to fix it afterwards...
btw, if you need any help in implementing any 3D stuff or objects in a future release, let me know, i will gladly help


thanks for all the good work, keep it on !
Post Reply