Chauvet Geyser RGB

Ask a generic question about the usage of QLC+, not related to a particular operating system
Post Reply
fullrange
Posts: 1
Joined: Fri Apr 29, 2016 6:19 pm
Real Name: Ronald

Im new to DMX. I got all my lights to work and the Gyser lights to work. I can set off the smoke on the Gyser manually. but When i put it in to a scene and play it back in the scene or show the smoke works but keeps on going and I have to turn off the machine to stop it. How do I adjust the time for the smoke duration?
User avatar
mcallegari
Posts: 4461
Joined: Sun Apr 12, 2015 9:09 am
Location: Italy
Real Name: Massimo Callegari
Contact:

thundercreekband
Posts: 1
Joined: Fri May 19, 2017 4:48 pm
Real Name: Andy Arthur

i have the same question but for a chauvet 1800 it works but will not turn off by the button
djmg
Posts: 14
Joined: Thu Dec 08, 2016 2:10 pm
Location: US
Real Name: Matthew Greathouse
Contact:

Research HTP vs LTP . I believe the default of the Geyser smoke channel is an LTP channel. If you do not give it a zero value after giving it the higher, the latest value it gets takes precedence and will continue to run. You can change it to HTP if you are using it how I think you are.

http://qlcplus.org/docs/concept.html
Post Reply