Help with Chauvet FXPar 3

Ask a generic question about the usage of QLC+, not related to a particular operating system
Post Reply
dalara1
Posts: 2
Joined: Fri Nov 10, 2017 9:07 pm
Real Name: David

Hello,

Here is my gear:
Chauvet FXpar3
I am using a DMXking Ultra DMX micro dongle
Windows 10

I am having trouble getting the "RGB SMD LEDs" to change immediately as it flows through the chase. They seem to run through the various channels rapidly before it finds the one that is set to aparticular scene. For example, if the second scene in a chase has the SMDs set to blue, it will have to rapidly run through the red and green before it gets to blue.

Does anyone know if there is a way I can fix this, or is this just how this particular fixture is going to act?

Thanks for the help!
User avatar
GGGss
Posts: 2662
Joined: Mon Sep 12, 2016 7:15 pm
Location: Belgium
Real Name: Fredje Gallon

If you send 'BLUE'-> it has to go to blue : instantly!!
if you send 'dim from orange to dim-white to light blue' : it will give you some odd results (involving green) - but Hey! that's what you want....

I'm guessing your fixture definition is wrong...

upload your project file (and possibly your fixture definitions)
All electric machines work on smoke... when the smoke escapes... they don't work anymore
siegmund
Posts: 703
Joined: Mon Nov 02, 2015 11:03 am
Location: Germany
Real Name: Lukas

Post Reply