Fixtures with interdependent channels

Ask a generic question about the usage of QLC+, not related to a particular operating system
Post Reply
IJW
Posts: 1
Joined: Tue Dec 19, 2017 8:59 pm
Real Name: Ian Wesley

Hi

I am trying to write a fixture definition for a Nitec (aka showtech) Hex-Par 12. The problem that I can't solve is that 2 of the dmx channels are interdependent, with 3 possible modes of operation

CH 8 = Strobe, 000 --- 015 No function, 016 --- 255 Slow to fast (when CH 9 is 000–031)
CH 8 = Speed 000 --- 255 Slow to fast (when CH 9 is 032–223)
CH 8 = Sound Sensitivity 000 --- 010 Off 011 --- 255 Controls the sound sensitivity level (when CH 9 is 224–255)

Is there a way of programming this in the fixture definition, or do I have to create 3 separate fixtures?
siegmund
Posts: 703
Joined: Mon Nov 02, 2015 11:03 am
Location: Germany
Real Name: Lukas

This is not possible to put in a fixture definition. Don't create extra fixtures, but have a look at point 6 of this post!
Post Reply