Virtual Console

Ask a generic question about the usage of QLC+, not related to a particular operating system
Post Reply
whiteruin
Posts: 4
Joined: Mon Sep 18, 2017 12:08 pm
Real Name: Simon Brunskill

Hope someone can help, I am a complete newbie with QLC.

I have managed the basics, and set up some scenes and chases. I am using a custom made footswitch (old USB keyboard) to activate buttons within virtual console, during live performances with my band. Problem is once you press a button on the footswitch activating the scene/chase I have no indicator to show which button is active. One button is programmed to clear all functions, but this ends up with the user tap dancing trying to switch off all functions, before activating the next one.

Is it possible to program a virtual console button to perform a two step function i.e.
step 1.clear all functions
step 2.start scene/chase

Or am I using the wrong feature/function ?

Many thanks
janosvitok
Posts: 1266
Joined: Mon Apr 13, 2015 7:05 am
Location: Bratislava, Slovakia
Real Name: Jano Svitok
Contact:

whiteruin
Posts: 4
Joined: Mon Sep 18, 2017 12:08 pm
Real Name: Simon Brunskill

Thank you very much janosvitok

I will have a play with this tonight

Much appreciated
Post Reply