Button not responding to midi messages

Ask a generic question about the usage of QLC+, not related to a particular operating system
Post Reply
Ariajazz
Posts: 15
Joined: Sun Mar 26, 2017 10:40 pm
Real Name: Julio

Hi again.

QLC is receiving CC midi messages through LOOP BE and MIDI YOKE ports (I tried them both).

1) I send CC49 and QLC receives CC50.
2) Button does not respond to midi message via internal midi ports.
3) Button responds when CC midi message is sent from KORG Nano Kontrol 2 through its physical port.

What is wrong?
User avatar
GGGss
Posts: 2666
Joined: Mon Sep 12, 2016 7:15 pm
Location: Belgium
Real Name: Fredje Gallon

Did you use a specific profile?
http://www.qlcplus.org/docs/howto-input-profiles.html

Can you send your profile... possible there is something wrong with it.
As long as QLC does not know what to do with the signal (entering QLC) you cannot set a button to react to the incomming signal...
All electric machines work on smoke... when the smoke escapes... they don't work anymore
Ariajazz
Posts: 15
Joined: Sun Mar 26, 2017 10:40 pm
Real Name: Julio

Problem solved. Thanks
Post Reply