Set fixed Value

Ask a generic question about the usage of QLC+, not related to a particular operating system
Post Reply
User avatar
MontyZuma
Posts: 39
Joined: Sat Apr 01, 2017 11:11 am
Real Name: Klaus Muth

Hi.
I've got an Stairville CLB 2.4 LED which has an "Dimmer" value.
https://images4.static-thomann.de/pics/ ... online.pdf

I'm using a fixture definition which was posted here. Now the Dimmer value is constantly in my way in scene definition since I have always have to set it to 255 in scenes - now if I attach a slider to that scene the output gets quadratic, because dimmer and RGB values move with the slider.

Is there a way to just fix that dimmer value to 255?

klaus
janosvitok
Posts: 1266
Joined: Mon Apr 13, 2015 7:05 am
Location: Bratislava, Slovakia
Real Name: Jano Svitok
Contact:

Put all your dimmers in a separate scene, remove them from other scenes.
Either create button that you will push at the start of the show or set the scene to autostart (see Image in Function Manager)
User avatar
MontyZuma
Posts: 39
Joined: Sat Apr 01, 2017 11:11 am
Real Name: Klaus Muth

Nice.
In the meantime I found a way to change the dimmer in the fixture editor so it only assumes values between 255 and 255.
This does the job but lacks the flexibility of your solution.

Thanks,
Klaus
Post Reply