double knob

Ask a generic question about the usage of QLC+, not related to a particular operating system
Post Reply
pippozzo68
Posts: 9
Joined: Fri Apr 08, 2016 9:29 pm
Real Name: massimiliano

you can implement a dual knob. In the sense that in case of gobo controls rotations you have values, for example from 0 to 100 clockwise rotation from fast to slow, stop rotation 101 and 102 to 200 counterclockwise rotation. I would like the console appears midi AKAI MPC40 that knob in the audio field that can be used in the same way as a Balance canfigurare the knob when the gobo is at the center does not run if I move it to the left rotates counterclockwise and if the right turn instead goes clockwise.
Thank you
siegmund
Posts: 703
Joined: Mon Nov 02, 2015 11:03 am
Location: Germany
Real Name: Lukas

I can only guess what you mean: Some sort of a switch with a middle position?
Anyway, this would be very hard to implement since (if I get it right) you want to guess the right switching positions by looking at the fixture definition.
pippozzo68
Posts: 9
Joined: Fri Apr 08, 2016 9:29 pm
Real Name: massimiliano

like this!!!!
Attachments
Immagine1.gif
Immagine1.gif (3.53 KiB) Viewed 444 times
User avatar
mcallegari
Posts: 4464
Joined: Sun Apr 12, 2015 9:09 am
Location: Italy
Real Name: Massimo Callegari
Contact:

A knob is another appearance of a slider.
On a slider in level mode, you can limit the range of DMX values. So limit it from 128 to 255. (level tab -> lower limit / high limit)
pippozzo68
Posts: 9
Joined: Fri Apr 08, 2016 9:29 pm
Real Name: massimiliano

YES is perfect :D
thanks you
Post Reply