Changing Button response in Virtual console

Ask a generic question about the usage of QLC+, not related to a particular operating system
Forum rules
Post Reply
hmschreiber
Posts: 18
Joined: Wed Dec 02, 2015 6:49 am
Real Name: Herbert Schreiber

Hallo again,

new question:

I have a lot of buttons in my virtual window. I wanted to change the response from border to LED. But it works only with a new designed button. The older once are still responding with a border.

Is this correct or have I made a mistake?
_Dietenhofen-Matrix.qxw
(235.92 KiB) Downloaded 51 times
Thank you

Herbert
Top
siegmund
Posts: 703
Joined: Mon Nov 02, 2015 11:03 am
Location: Germany
Real Name: Lukas

Hey,

don't know why, but you can change the appearance of all buttons by setting the desired mode in the vc settings, save the workspace file and re-open it.

Regards,
siegmund
Top
hmschreiber
Posts: 18
Joined: Wed Dec 02, 2015 6:49 am
Real Name: Herbert Schreiber

Hi,

thanks, it works. Was a misstake by me.

Best wishes for christmas and a happy new year (perhaps with QLC+ version 5.0)
Top
Post Reply

Return to “Generic”