RGB MATRIX does not execute

Ask a question about the usage of QLC+ with the Mac OSX operating system
Post Reply
almarques
Posts: 22
Joined: Wed Mar 23, 2016 2:07 pm
Real Name: Alex Marques

RGB MATRIX does not execute

Post by almarques » Sat Apr 08, 2017 1:38 am

I'm having issues with RGBMatrix on OSX.
I created a group of devices with 12x1 and any effect that I choose in the Matrix the system does not execute ...

I did the same in Windows and runs without problems .... someone already had this problem, how did you solve it?
---
Alex Marques
Elton Som e Eventos
www.eltonsom.com.br

janosvitok
Posts: 830
Joined: Mon Apr 13, 2015 7:05 am
Location: Bratislava, Slovakia
Real Name: Jano Svitok
Contact:

Re: RGB MATRIX does not execute

Post by janosvitok » Sat Apr 08, 2017 7:08 am

Can you post the problematic workspace (qxw) + any custom qxf files?

Did you check DMX monitor? Does it show proper values?
How do you know the matrix does not execute?

Jano

almarques
Posts: 22
Joined: Wed Mar 23, 2016 2:07 pm
Real Name: Alex Marques

Re: RGB MATRIX does not execute

Post by almarques » Sat Apr 15, 2017 12:20 am

Does not display anything on the DMX monitor ...
On PC if I use the same, it works normally ....
---
Alex Marques
Elton Som e Eventos
www.eltonsom.com.br

almarques
Posts: 22
Joined: Wed Mar 23, 2016 2:07 pm
Real Name: Alex Marques

Re: RGB MATRIX does not execute

Post by almarques » Sat Apr 15, 2017 12:38 am

I was able to make the DMX monitor respond ...
Tomorrow I will test with the LEDs on.
The problem was in Fixture, I changed from LSB mode to MSB ....
Apparently it solved, I'll check the other devices I created.
---
Alex Marques
Elton Som e Eventos
www.eltonsom.com.br

Post Reply