OSC input from QLab
-
- Posts: 7
- Joined: Wed Mar 15, 2017 4:10 pm
- Real Name:
Thanks for the info. I suppose I could also fix this by making Q Lab send a custom OSC message with at least one value. Would you have an idea how I structure such a custom OSC message in Q Lab so that QLC+ can accept it and create a channel for it in the input profile?
- mcallegari
- Posts: 4480
- Joined: Sun Apr 12, 2015 9:09 am
- Location: Italy
- Real Name: Massimo Callegari
- Contact:
No idea. Never used Qlab in my life
-
- Posts: 7
- Joined: Wed Mar 15, 2017 4:10 pm
- Real Name:
I believe I've found a solution now. I used a custom OSC message in Q Lab, written as "/qlc+/1/push 1"
Not sure yet which part of this message is necessary or sufficient, but it was able to automatically create a channel (a button) in the input profile when the autodetect was on. And the OSC messages from Q Lab can now push a corresponding button in the VC of QLC+.
Thanks for the patience, Massimo! Much appreciated.
Not sure yet which part of this message is necessary or sufficient, but it was able to automatically create a channel (a button) in the input profile when the autodetect was on. And the OSC messages from Q Lab can now push a corresponding button in the VC of QLC+.
Thanks for the patience, Massimo! Much appreciated.