QLC+ and MacOS Sierra 10.12 with DMXKing ultraDMX micro

Ask a question about the usage of QLC+ with the Mac OSX operating system
Post Reply
smfoo
Posts: 1
Joined: Fri Nov 18, 2016 5:30 pm
Real Name: Stephan

I did use QLC with 10.9 and 10.10 but just can not get it to work with 10.12. All terminal commands on the forum only work with 10.11.
Any idea to get it back to work? (Works flawless on Win 7, so no hardware problem)
mapam
Posts: 3
Joined: Mon Jun 05, 2017 2:40 pm
Real Name: marco tonet

Same problem here
rainH20
Posts: 1
Joined: Tue Jun 06, 2017 12:36 am
Real Name: Larry

I have the same problem no output from my dmxKing ultra dmx micro
CalebGrayson
Posts: 12
Joined: Tue Apr 14, 2015 4:27 pm
Real Name: Caleb Grayson

i got it to work by changing the mode in the mapper of the DMX Device from
Open Tx to Pro Tx/Rx. then tick the Output 1.
Post Reply