Enttec Open DMX

Ask a question about the usage of QLC+ with the Windows operating system
Post Reply
MrBenj
Posts: 13
Joined: Sat Jun 24, 2017 8:27 am
Real Name: Ethan Benjamin

Enttec Open DMX

Post by MrBenj » Mon Sep 11, 2017 8:54 am

Hi all,

Do any of you use the Enttec Open DMX(not a clone)? If you do,which version of Windows do you use and how stable is it?

Thanks in advance

User avatar
GGGss
Posts: 211
Joined: Mon Sep 12, 2016 7:15 pm
Location: Belgium
Real Name: Fredje Gallon

Re: Enttec Open DMX

Post by GGGss » Tue Sep 12, 2017 8:48 am

All electric machines work on smoke... when the smoke escape from machines... they don't work anymore

janosvitok
Posts: 841
Joined: Mon Apr 13, 2015 7:05 am
Location: Bratislava, Slovakia
Real Name: Jano Svitok
Contact:

Re: Enttec Open DMX

Post by janosvitok » Tue Sep 12, 2017 9:56 am

I suppose the question wasn't whether is it supported (it is) but what are the actual experiences.

MrBenj
Posts: 13
Joined: Sat Jun 24, 2017 8:27 am
Real Name: Ethan Benjamin

Re: Enttec Open DMX

Post by MrBenj » Wed Sep 13, 2017 4:59 am

janosvitok wrote:
Tue Sep 12, 2017 9:56 am
I suppose the question wasn't whether is it supported (it is) but what are the actual experiences.
That would be correct

kenact
Posts: 40
Joined: Thu Apr 23, 2015 6:43 am
Real Name: Ken Coughlin

Re: Enttec Open DMX

Post by kenact » Thu Nov 02, 2017 5:14 am

I've used the ENTTEC Open DMX Win XP, Vista, 7 and now 10. I haven't had any problems, although my setups aren't very demanding. The most I've controlled is 24 generic dimmers, and 8 generic RGBs.

Post Reply