Dear All,
I'm a newbie in QLC+. I've built my project in which I designed several scenes. At the momet I change scene pressing a key of my PC keyboard. With a key I move to the next scene, with another key I come back to the previous scene, with another key I stop the scene and so on. It there the possibility of doing this with an USB controller, for example a footswitch with more than 3 pedals? If yes, can you indicate a compatible USB controller?
Best Regards,
Mattia Dell'Oca
Changing scenes with an USB footswitch
- mcallegari
- Posts: 4481
- Joined: Sun Apr 12, 2015 9:09 am
- Location: Italy
- Real Name: Massimo Callegari
- Contact:
if by "USB controller" you mean "USB MIDI controller", then there's plenty you can choose from.
Example: http://www.music-group.com/Categories/B ... 10/p/P0089
Example: http://www.music-group.com/Categories/B ... 10/p/P0089
-
- Posts: 9
- Joined: Mon Jan 02, 2017 12:02 pm
- Real Name: Mattia Dell Oca
Dear mcallegari
Thank you very much for your answer.
I was wondering if also something like this was usable:
http://www.ebay.com/itm/FS3-P-USB-Tripl ... 585328904
Best Regards,
Mattia
Thank you very much for your answer.
I was wondering if also something like this was usable:
http://www.ebay.com/itm/FS3-P-USB-Tripl ... 585328904
Best Regards,
Mattia
-
- Posts: 4
- Joined: Sun Apr 28, 2019 11:44 am
- Real Name: David McCollum
Sorry I'm late to the thread but I'm using a Behringer FCB1010 and it works fine. You can usually find them online for a decent price. You will have to spend a little time programming the footboard, then properly mapping the input to QLC but after that...golden.
https://www.ebay.com/sch/i.html?_from=R ... 0&_sacat=0
https://www.ebay.com/sch/i.html?_from=R ... 0&_sacat=0