BCF 2000 usage

Ask a question about the usage of QLC+ with the Windows operating system
Post Reply
simonegr
Posts: 15
Joined: Fri Apr 08, 2016 1:51 pm
Real Name: Grigis Simone

BCF 2000 usage

Post by simonegr » Tue Jun 13, 2017 6:13 pm

Dear,
i have buy the bcf 2000, but i dont now if it's better use this with makei mode or normal mode ? what'is the difference ?

Best regard's

janosvitok
Posts: 841
Joined: Mon Apr 13, 2015 7:05 am
Location: Bratislava, Slovakia
Real Name: Jano Svitok
Contact:

Re: BCF 2000 usage

Post by janosvitok » Tue Jun 13, 2017 7:09 pm

http://www.qlcplus.org/docs/supported-i ... vices.html says (I wrote that :) ) that mackie mode has more controls.
I also wrote in commit that added the profile:
In comparison to "normal" mode, all buttons are usable.
Two leftmost encoder groups buttons are shifts.
That means (if I remember correctly) that in mackie mode you can use the top right buttons (edit section) as well.
On the other hand, in normal mode you can customize buttons and faders (e.g. whether buttons are toggle or momentary/flash).

Don't forget to set MIDI channel to 1-16 in mackie mode in MIDI plugin settings.

simonegr
Posts: 15
Joined: Fri Apr 08, 2016 1:51 pm
Real Name: Grigis Simone

Re: BCF 2000 usage

Post by simonegr » Thu Jun 15, 2017 11:18 am

Thank you very much

Post Reply